
This is our mail-in service to reinforce the weak end tanks on the LSA intercooler bricks. We inspect, hot tank, repair the depression in the end tank if there is one, and weld on a 1/8" 6061 reinforcing plate. All bricks are then pressure tested to 20psi for 1 hour before being dried and packaged. PLEASE FOLLOW PACKING INSTRUCTIONS BELOW!!!!!!
The LSA water manifold AN conversion includes removing the stock barb fittings, porting out the inside of the manifold to remove any steps or flow restrictions on both ends, cleaning the manifold and welding on your choice of -8AN, -10AN, or -12AN male fittings.
Shipping Address is:Olson Kustom Works
380 Marcus St
Sultan WA 98294
Note: When shipping, PLEASE blow out the brick with compressed air and put it in a liquid tight bag (zip-loc or similar), and pad it so that it can not bounce around inside the box. Any fin or core damage is not our responsibility. If the brick is NOT in a water tight bag, the box will become wet and fall apart, and can be subject to fees and fines from the carriers for leaking goods, or your item will not stay contained in the box.